Conveyor Length: 24” -120” (Pay only for the length you purchase. Why pay for extra conveyor you don’t need?)

Belt Sizes: 6”, 9”, 12”, 15” 18” 21” 24” 27” 30” (Conveyor is 1” wider than belt width)

Drive: Patented Direct Drive Variable Speed 25-90 Watt Brushless DC with 115VAC fully assembled with remote mountable controls and removable 9' power cord. [Speed in stock (others on request) 1-14fpm; 2-25fpm; 4-70fpm or Digital PLC ready 3-125fpm]
All ball bearing parallel geared motors manufactured by Oriental Motor USA Corp.

Loads: 6” belt rated to carry up to 150 lbs on single section. All other belts rated for 200 lbs on single section.

Stands: 2 stands are required to support the conveyor. Stands can be used at the ends of the conveyor to join two conveyors together end-to- end or end-to-side. All dimensions for stand height are based on measurements from the floor to the top of the belt. Abbreviated, TOB. (For Stand heights see Stands in Product Listing.)

Guard Rails: Removable 1” high guard rails are included on all models. Optional “flush” guard rails can be substituted when ordering.
(See Accessories, Adjustable Guide Rails if you want to deflect product being carried on the belt.)

Minimum Part Transfer: End-to-end transfer with back pressure = 0.5” long. End-to-end without back pressure = 3” long.

Maximum incline: 10° (Our belts are designed with a low friction surface that enables it to easily slide under packages. Please consider another type conveyor if you are depending on the belt friction to carry items up inclines greater than 10°.)

Operating Temperature: 0°—185° F (Please consult factory for exceptions and specialty belting for higher intermittent temperature ratings.

Warranty: 2 Years. (Please see our Terms and Conditions of Sale)